Most RV owners take pride in the appearance of their rigs, and let’s admit it, most want others to take notice. Prior to an outing, many owners dedicate a weekend or two for a complete wash and wax to make the RV shine, but no matter how hard you work at keeping the exterior pristine, Filon siding and vinyl graphics begin to fade and crack from years of environmental stress. Most vinyl graphics time out after five or six years, and even with the best maintenance plan, the sun takes its toll. The Filon siding can be waxed or polished to attain a new look, but the vinyl cannot be brought back to life after fading and cracking begins. At the same time, unfortunately the siding can also start to crack underneath the cracking graphics. This would need to be repaired by a body shop and sometimes require paint.
Given the opportunity to replace the graphics and renew the exterior appearance of an otherwise fine RV is certainly a good investment. This is where Beaver Stripes comes into the picture. We offer a one-stop shop for bringing an RV exterior back to life. We have perfecting the art of refreshing RVs with custom graphics, exterior polishing for a full renovation.
Once the design is finalized, time to strip off the old vinyl and make way for the new graphics. The task of removing and replacing the entire RV’s vinyl graphics seemed daunting, it cannot be done without the proper tools, people power and know-how. If you have the time, you can do it yourself to save some money, but you will need a few tools and a lot of elbow grease. More than likely, removing the old graphics yourself will probably take the better part of a week to complete. For beaver Stripes to complete the process we only need 3-4 Days. this includes removal of the existing graphics, polishing the exterior, then cutting, printing and installing the new graphics.